North America Asia Pacific Germany United Kingdom Chinese Simplified Chinese Traditional Korean Home
 
 
 
 
 
 
 
 
 
 
     
USB MultiSwitch Hub

     
     

Equipped with two upstream and four downstream ports, SMSC’s USB MultiSwitch™ Hub (USB2524) enables easy sharing of peripherals by electronically switching them between two USB hosts. Two discrete hub devices and expensive analog switches that were previously required are no longer needed to share Hi-Speed USB peripherals. The USB MultiSwitch provides a cost-effective, single-chip solution enabling this powerful function to be implemented in the most cost-sensitive consumer applications. Requiring no more than standard USB Hub-Class support in host software, the USB MultiSwitch appears as a standard four-port USB hub to either USB host system and supports standard USB topology. The USB MultiSwitch is targeted for applications such as printers, desktop PC drive-bays, LCD displays and mobile PC accessories. The USB MultiSwitch is also well suited for embedded applications that require dual-role USB host and device functionality.

 
BLOCK DIAGRAM
 
 
Highlights
Unique Dual-Host Hub Architecture
USB Peripheral Sharing
High Throughput
Minimum Host Software Overhead
Small Footprint
Ease of Integration
   
 
 
     
USB MultiSwitch™ Hub Typical Applications
     
     
Per-port switching provides high degree of device sharing flexibility
Multiple switching options ease system design
Programmable auto-switch mode enables unique applications
   
SMSC MultiTRAK™ technology provides a dedicated-transaction translator for
Full-Speed/Low-Speed devices that are attached at every downstream port
Provides Full-Speed USB data rate at 12 Mbps per port even under full load
960 Mbps maximum aggregate data rate when both USB Hi-Speed hosts are active
   
Appears as a standard USB2.0 hub controller on either host system
Requires no more than standard USB Hub-Class driver support
Standard USB connect and disconnect behavior as device is switched from one host to the other
   
Small 8x8 mm QFN package occupies
minimum PCB space
Flexible configuration options ease embedded system design
USB-IF certified silicon building block ensures full USB compliance on integrated system
   
   
Datasheets
USB2524
   
 
USB2.0 Specification compliant
Two upstream ports for host connectivity
Four downstream ports for device connectivity
One embedded and two peripheral
switching modes
LED outputs indicate switch activity and
device speed
Configuration options — Built-in default
or via external
I²C EEPROM or System Management
Bus (SMBus)
On-chip 1.8V linear voltage regulator
Integrated USB termination & pull-up/pull-down resistors
Internal short-circuit protection on USB
differential signal pins
3.3V IO with 5V input tolerance
Small footprint 56-pin QFN package
   
Target Applications
Desktop PC drive-bays
Mobile PC docking stations and
port replicators
All-in-one and photo printers
LCD monitors
KVM switches
USB device sharing peripherals
Set-top boxes
DVD/HDD recorders and players
Any USB dual-role host and device system
General embedded applications
   
     
 

Also Visit: Titan Supply Chain Services Corp. Nu Horizons International